Supermicro X13SAE - Page 13

13
Chapter 1: Introduction
Quick Reference (X13SAE-F)
DIMMA1
DIMMA2
DIMMB1
DIMMB2
USB11 (3.2 (20Gb))
USB4/5 (3.2 (5Gb))
USB6 (3.2 (5Gb))
LED4
BMC_HB_LED
UID
DP
HDMI
VGA
DVI
IPMI_LAN
USB0/1
LAN1
USB7 (3.2 (10Gb))
USB10 (3.2 (20Gb))
LAN2
USB8/9 (3.2 (10Gb))
JPL2
JPAC1
PCI-E M.2-M2
PCI-E M.2-M3
PCI-E M.2-M1
JPW1
CPU SLOT7 PCI-E 5.0 X16 CPU SLOT4 PCI-E 5.0 X8 (IN x16) PCH SLOT5 PCI-E 3.0 X4 PCH SLOT2 PCI-E 3.0 X4
SLOT1 PCI 33MHZ
BMC
BT1
MAC CODE
BMC CODE
BAR CODE
MAC CODE
BIOS LICENSE
X13SAE-F
DESIGNED IN USA
REV:1.00
JPME2
JLED1
JD1
JPG1
I-SATA0
I-SATA1
I-SATA2
I-SATA3
I-SATA4
I-SATA5
I-SATA6
I-SATA7
JWD1
PWR_LED
CATERR_LED
JSTBY1
JL1
JSD1
SYS_FAN3
SYS_FAN2
SYS_FAN1
CPU_FAN2
CPU_FAN1
JPW2
12V_PUMP_PWR1
AUDIO_FP
COM1
USB2/3
JTPM1
SP1
JF1
JBT1
JPI2C1
PCH
AUDIO
JPL1
JSD1
IPMI_LAN
USB0/1
LAN1
USB7/10
LAN2
USB8/9
AUDIOUIDJPL2
CATERR_LED
PCH
SLOT5
LED4
CPU
SLOT4
CPU
SLOT7PCH
SLOT2
SLOT1
BMC_HB_LED
DP
HDMI
VGA
DVI
AUDIO_FP
COM1
USB2/3
JPAC1
PCI-E M.2-M2
PCI-E
M.2-M3
PCI-E M.2-M1
JTPM1
JD1
JF1
SP1
BT1
JPME2
PWR_LED
JSTBY1
JL1
JLED1
JPW2
JPL1
CPU_FAN1
CPU_FAN2
SYS_FAN2
SYS_FAN3
JWD1
SYS_FAN1
I-SATA0
I-SATA1
I-SATA2
I-SATA3
I-SATA4
I-SATA5
I-SATA6
I-SATA7
JPW1
12V_PUMP_
PWR1
DIMMA1
DIMMA2
DIMMB1
DIMMB2
JPI2C1
USB11JPG1
JBT1
USB4/5 USB6
Notes:
• Refer to Chapter 2 for detailed information on jumpers, I/O ports, and JF1 front panel
connections.
• " " indicates the location of Pin 1.
• Jumpers/LED indicators not indicated are used for testing only.
• Use only the correct type of onboard CMOS battery as specied by the manufacturer. Do
not install the onboard battery upside down to avoid possible explosion.