Supermicro X13SAE - Page 14

14
Super X13SAE/X13SAE-F User's Manual
Quick Reference Table
Jumper Description Default Setting
JBT1 Clear CMOS (Onboard) Short Pads to Clear CMOS
JD1 Speaker/Buzzer
Pins 1-4: External Speaker
Pins 3-4: Buzzer (Default)
JPAC1 HD Audio Enable/Disable Pins 1-2 (Enabled)
JPG1 VGA Enable/Disable (X13SAE-F only) Pins 1-2 (Enabled)
JPL1, JPL2 LAN1/LAN2 Enable/Disable Pins 1-2 (Enabled)
JPME2 ME Manufacturing Mode Pins 1-2 (Normal)
JWD1 Watch Dog Function Enable Pins 1-2 (Reset)
LED Description Color/State
BMC_HB_LED
X13SAE: Standby Power LED
X13SAE-F: BMC Heartbeat LED
X13SAE: Solid Green (Standby Power On)
X13SAE-F: Blinking Green (BMC Normal)
CATERR_LED Catastrophic Error LED Solid Orange: System CATERR
LED4 Unit Identier (UID) LED (X13SAE-F, IPMI only) Solid Blue: Unit Identied
PWR_LED Onboard Power LED Solid Green: Power On
Note: The table above is continued on the next page.