16
Super X13SAE/X13SAE-F User's Manual
Motherboard Features
CPU
• Supports a single 12th Gen. Intel Core i9/i7/i5/i3 series processor with up to 16 cores (8+8 cores) and a thermal design
power (TDP) of up to 125W
Memory
• Up to 128GB DDR5 Unbuered (UDIMM) ECC/Non-ECC with speeds of up to 4400MHz (1DIMM) or 4000MHz (2DPC)
in four 288-pin memory slots
DIMM Size
• Up to 128GB
Note 1: Memory capacity and frequency is CPU dependent.
Note 2: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
• Intel PCH W680
Expansion Slots
• One PCI slot (PCI SLOT1)
• Two PCIe 3.0 x4 slots (PCH SLOT2/5)
• One PCIe 5.0 x16 slot (CPU SLOT7)
• One PCIe 5.0 x8 (IN x16) slot (CPU SLOT4: supports Auto Switch)
• One M.2 PCIe 4.0 x4 socket (supports M-Key 2280, from CPU)
• Two M.2 PCIe 4.0 x4 sockets (support M-Key 2280, from PCH)
Note 1: When using 2x8 conguration, the rst 8 lane device must use lanes 0~7.
Note 2: It is required to use SLOT4 with an 8 lane device installed in SLOT 7.
Network
• Intel Ethernet i225V (X13SAE)
• Intel Ethernet i225-LM (X13SAE-F)
• Intel Ethernet i219LM (for AMT/vPro)
• Realtek RTL8211F (dedicated IPMI LAN port, X13SAE-F only)
I/O Devices
• Serial (COM) Port • One front accessible serial port header (COM1)
• SATA 3.0
• Eight SATA 3.0 ports at 6Gb/s (support RAID 0, 1, 5, and 10 with up to six SATA
3.0 storage devices)
• Video Port • One DisplayPort 1.4a connection on the rear I/O panel
• One HDMI 2.0b connection on the rear I/O panel
• One DVI-D port on the rear I/O panel
• One VGA port on the rear I/O panel (X13SAE-F only)
Motherboard Features
Note: The table above is continued on the next page.
To Next Page
Loading...
