Supermicro X13SAE - Page 75

Chapter 4: UEFI BIOS
75
Power Conguration
Watch Dog Function
If this feature is enabled, the Watch Dog Timer will allow the system to reset or generate
NMI based on jumper settings when it is expired for more than ve minutes. The options
are Disabled and Enabled.
AC Loss Policy Depend on
Use this feature to set the power state after a power outage. Select Stay O󰀨 for the system
power to remain o󰀨 after a power loss. Select Power On for the system power to be turned
on after a power loss. Select Last State to allow the system to resume its last power state
before a power loss. The options are Stay O󰀨, Power On, and Last State.
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select
4 Seconds Override for you to power o󰀨 the system after pressing and holding the power
button for four seconds or longer. Select Instant O󰀨 to instantly power o󰀨 the system as
soon as you presses the power button. The options are Instant O󰀨 and 4 Seconds Override.
DeepSx Power Policies
This feature enables DeepSx Power Policy conguration. The options are Disabled,
Enabled in S4-S5, and Enabled in S5.
CPU Conguration
The following CPU information will be displayed:
• Installed CPU brand and model
• CPU Signature
• Microcode Patch
• Max CPU Speed
• Min CPU Speed
• CPU Speed
• Number of E󰀩cient-cores
• Number of Performance-cores
• Hyper Threading Technology
• VMX