Supermicro X13SAE - Page 89

Chapter 4: UEFI BIOS
89
• Host addresses
• Route Table
• Gateway addresses
• DNS addresses
Interface ID
Enter an ID for the device
DAD Transmit Count
Enter a value for Duplicate Address Detection (DAD) Transmit Count. A value of zero
indicates the DAD is not performed. The default is 1.
Policy
Use this feature to set the Policy. The options are Automatic and Manual.
*If this feature is set to Manual, the following features will become available for
conguration:
Advanced Conguration
New IPv6 Address - Enter a new IPv6 address
New Gateway Addresses - Enter a Gateway address
New DNS Addresses - Enter a new DNS address
Commit Changes and Exit
Select this feature to save the changes you've made and return to the upper con-
guration page.
Discard Changes and Exit
Select this feature to discard all the changes and return to the upper conguration
page.
Save Changes and Exit
Select this feature to save the changes you've made and return to the upper congu-
ration page.