Supermicro X13SAE - Page 90

Super X13SAE/X13SAE-F User's Manual
90
PCH-FW Conguration
The following PCH-IO information is displayed:
• ME Firmware Version
• ME Firmware Mode
• ME Firmware SKU
ME FW Image Re-Flash
Use this feature to enable or disable the ME Firmware image reash capability. The options
are Disabled and Enabled.
TPM Device Selection
Use this feature to select the TPM device. The options are dTPM and PTT.
AMT Conguration
USB Provisioning of AMT
Use this feature to enable or disable USB provisioning. The options are Disabled and
Enabled.
MAC Pass Through
Use this feature to enable or disable MAC Pass Through function. The options are Dis-
abled and Enabled.
Activate Remote Assistance Process
Select Enabled to trigger the Client-initiated Remote Access (CIRA) boot. The options
are Disabled and Enabled.
Note: Network Access must be activated rst from MEBx Setup
Uncongure ME
This feature uncongures ME and resets the MEBx password to its default on the next
boot. The options are Disabled and Enabled.
ASF Conguration
PET Progress
This feature enables the Platform Event Trap (PET) Progress to receive PET events
in order to provide advanced warning of possible system failures. The options are
Disabled and Enabled.