Supermicro X13SAE - Page 94

Super X13SAE/X13SAE-F User's Manual
94
Spin Up Device
When this feature is disabled, all drives will spin up at boot. When this option is enabled,
it will perform Staggered Spin Up on any drive this option is activated. The options are
Disabled and Enabled.
SATA Device Type
Use this feature to identify the type of HDD that is connected to the SATA port. The options
are Hard Disk Drive and Solid State Drive.
VMD setup menu
VMD Conguration
Enable VMD controller
Use this feature to enable the VMD controller. The options are Disabled and Enabled.
*If this feature is set to Enabled, the following features will become available for
conguration:
Enable VMD Global Mapping
Use this feature to enable the VMD Global Mapping. The options are Disabled and Enabled.
*If this feature is set to Disabled, the following feature will become available for
conguration:
Map this Root Port under VMD
Use this feature to map or unmap this Root Port to VMD. The options are Disabled and
Enabled.
Root Port BDF details
Display the information of Root Port BDF.
Serial Port Console Redirection
COM1 / SOL / AMT SOL
COM1 Console Redirection / SOL Console Redirection / AMT SOL
Console Redirection
Use this feature to enable the console redirection support for a serial port specied by you.
The options are Disabled and Enabled.