3
Preface
Preface
About This Manual
This manual is written for system integrators, IT technicians and knowledgeable end users.
It provides information for the installation and use of the motherboard.
About This Motherboard
The Supermicro X13SEI-TF/-F supports the 4th Generation Intel® Xeon® Scalable Processor
Scalable Processor Socket E with up to 60 cores and a Thermal Design Power (TDP) of
350W. Built with the Intel PCH C741 chipset, the X13SEI-TF/-F supports 2048GB of ECC
RDIMM/RDIMM 3DS DDR5 memory with speeds of up to 4800MT/s, M.2 slots, and a Trusted
Platform Module (TPM) header. This motherboard is optimized for high-performance, and
GPU applications that address the needs of next generation server applications. Note that
this motherboard is intended to be installed and serviced by professional technicians only.
For processor/memory updates, refer to our website at http://www.supermicro.com/products/.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and to prevent
damage done to the components or injury to yourself:
Warning! Indicates high voltage may be encountered while performing a procedure.
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.
Important: Important information given to ensure proper system installation or to
relay safety precautions.
Note: Additional Information given to dierentiate various models or to provide in-
formation for proper system setup.
To Next Page
Loading...
