Chapter 4: UEFI BIOS
109
4.5 BMC
Use this menu to congure BMC settings.
BMC Firmware Revision
This feature indicates the IPMI rmware revision used in your system.
BMC STATUS (Baseboard Management Controller)
This feature indicates the status of the IPMI rmware installed in your system.
System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled to enable all system event logging upon system boot. The options are
Disabled and Enabled.
Erasing Settings
Erase SEL
Select (Yes, On next reset) to erase all system event logs upon next system boot. Select
(Yes, On every reset) to erase all system event logs upon each system reboot. Select No
to keep all system event logs after each system reboot. The options are No, (Yes, On next
reset), and (Yes, On every reset).
To Next Page
Loading...
