Supermicro X13SRA-TF - Page 125

Chapter 4: UEFI BIOS
125
Certication GUID
Press <Enter> and input the certication GUID.
Commit Changes and Exit
Use this feature to save all changes and exit TLS settings.
Discard Changes and Exit
Use this feature to discard all changes and exit TLS settings.
Delete Certication
This feature is used to delete the certicate if a certicate has been enrolled in the system.
Intel(R) Virtual RAID on CPU
Note 1: It is available when a device is connected to the PCIe or M.2 slots, and VMD
support is enabled for the slot.
Note 2: To enable a slot for VMD Support, go to Advanced -> Chipset Conguration
-> North Bridge -> IIO Conguration -> Intel VMD Technology -> Intel VMD for Volume
Management Device on CPU. After making changes on VMD conguration, reboot the
system for the changes to take e󰀨ect. Then this feature will be available under the
Advanced menu.
The following information is displayed:
• Intel(R) VROC with VMD Technology x.x.x.xxxx
• Upgrade key:
• Intel VROC Managed Controllers
All Intel VMD Controllers
The device information will be displayed in the Non-RAID Physical Disks.
Note: For detailed instructions on how to congure VROC RAID settings, please refer
to the VROC RAID Conguration User's Guide posted on the web page under the link:
https://www.supermicro.com/support/manuals/.