Supermicro X13SRA-TF - Front Control Panel

47
Chapter 2: Installation
2.7 Front Control Panel
The front control panel header (JF1) contains header pins for various buttons and indicators
that are normally located on a control panel at the front of the chassis. These connectors
are designed specically for use with Supermicro chassis. Refer to the gure below for the
descriptions of the front control panel buttons and LED indicators.
BAR CODE BAR CODE
IPMI CODE
MAC CODE MAC CODE SAS CODE
JTPM1
SP1
USB9 (3.2)
(USB3.2 GEN2X2)
UID-LED
JPI2C1
M.2-C01 LED
M.2-C02 LED
JF1
JWD1
JPL1
JPUSB1
JPL2
JSD1
FAN2
HD AUDIO
AUDIO FP
JUIDB1
LED8
COM1
USB0/1
FANB
FANC
BATTERY
DIMME2 DIMMF2 DIMMF1 DIMME1
DIMMA2 DIMMA1 DIMMB2 DIMMB1
SATA 1
SATA 0
SATA 3
SATA 2
SATA 4
SATA 5
M.2-C01
M.2-C02
JPME2
JL1
JRK1
(RAID Key Header)
JCMOS
JBT1
JPW2
JPW3
FAN1
FANA
JSTBY1
CPU SLOT6 PCIe 5.0 X16
JOH1
JPW1
12V_ PUMP_PWR1
USB8
(USB3.2 GEN2X2)
VGA
CPU SLOT4 PCIe 5.0 X16
PCH SLOT1 PCIe 4.0 X4
CPU SLOT2 PCIe 5.0 X16
BMC LED
JSPDIF_OUT
JPAC1
CPU
PCH
BIOS LICENSE
LAN
CTRL
BMC
USB6/7
(USB3.2 GEN2)
LAN1
USB4/5
(USB3.2 GEN2)
LAN2
Power LED
(PCIe 5.0 X4)
(PCIe 5.0 X4)
X13SRA-TF
DESIGNED IN USA
REV:1.01
JD1
(SPEAKER 1-4)
USB2/3 (3.0)
(USB3.2 GEN1)
LAN
CTRL
Power Button
(Blue LED_Cathode_UID)
Reset Button
HDD LED
FP PWR LED
ID_UID/3.3V Stby
Ground
19
Ground
20
1 2
Ground
Power Fail (for LED6)
NIC2 Active LED
NMI
3.3V
(Red OH/Fan Fail/PWR Fail for LED5/Blue UID LED)
3.3V
Red+ Blue+
P3V3_STBY
NIC1 Active LED
Key
Key
P3V3_STBY
Figure 2-2. JF1 Header Pins