Supermicro X13SRA-TF - Security Settings

Chapter 4: UEFI BIOS
133
The following information is displayed:
• Administrator Password
• User Password
• Password Description
Administrator Password
This feature indicates if an administrator password has been installed. It also allows you to
set the administrator password which is required to enter the BIOS Setup utility. The length
of the password should be from three characters to 20 characters long.
User Password (Available when "Administrator Password" has been set)
This feature indicates if a user password has been installed. It also allows you to set the user
password which is required to enter the BIOS Setup utility. The length of the password should
be from three characters to 20 characters long.
4.6 Security
This feature allows you to congure the following security settings for the system.
Note: For detailed instructions on how to congure Security Boot settings, please refer
to the Security Boot Conguration User's Guide posted on the web page under the
link: https://www.supermicro.com/support/manuals/.