Appendix D: UEFI BIOS Recovery
155
7. After the BIOS recovery process is complete, press any key to reboot the system.
Note: It is recommended that you update your BIOS after BIOS recovery. Please follow
the update procedures below.
8. Press <Del> during system boot to enter the BIOS Setup utility. From the top of the
tool bar, select Boot to enter the submenu. From the submenu list, select Boot Option
#1 and set Boot Option #1 to [UEFI AP:UEFI: Built-in EFI Shell] as shown below. Press
<F4> to save the settings and exit the BIOS Setup utility.
To Next Page
Loading...
