Supermicro X13SRA-TF - Page 52

52
Super X13SRA-TF User's Manual
FP Power LED
The Front Panel Power LED connection is located on pins 15 and 16 of JF1. Refer to the
table below for pin denitions.
FP Power LED
Pin Denitions (JF1)
Pins Denition
15 3.3V
16 FP PWR LED
NMI Button
The non-maskable interrupt (NMI) button header is located on pins 19 and 20 of JF1. Refer
to the table below for pin denitions.
NMI Button
Pin Denitions (JF1)
Pins Denition
19 NMI
20 Ground
1. FP PWR LED
2. NMI
Power Button
(Blue LED_Cathode_UID)
Reset Button
HDD LED
FP PWR LED
ID_UID/3.3V Stby
Ground
19
Ground
20
1 2
Ground
Power Fail (for LED6)
NIC2 Active LED
NMI
3.3V
(Red OH/Fan Fail/PWR Fail for LED5/Blue UID LED)
3.3V
Red+ Blue+
P3V3_STBY
NIC1 Active LED
Key
Key
P3V3_STBY
1
2