Supermicro X13SRA-TF - Page 54

54
Super X13SRA-TF User's Manual
(Continued from previous page)
Important: To provide adequate power supply to the motherboard, be sure to con-
nect the 24-pin ATX PWR and the required 8-pin PWR connectors to the power sup-
ply. Failure to do so may void the manufacturer warranty on your power supply and
motherboard.
When installing multiple GPU cards, it is recommended that you connect the power
supplies to the 24-pin ATX power connector and both 8-pin power connectors (JPW2
and JPW3) to the power supply.
GPU Cards and the Required Connectors
Type of GPU Number of GPU Cards JPW1 JPW2 JPW3
Single-Width GPU X 1
V V V
GPU X 2
V V V
GPU X 3
V V V
Double-Width GPU X 1
V V V
GPU X 2
V V V
Triple-Width GPU X 1
V V V
GPU X 2
V V V
Note 1 : When using heavy loading devices, it is strongly recommended that you
connect the power supplies to the 24-pin ATX power connector and both 8-pin
power connectors.
Note 2: To use the CPU overclocking feature, be sure to connect the power supplies
to the 24-pin ATX power connector and both 8-pin power connectors.
Note 3: To avoid possible system overheating, be sure to provide adequate airow
to your system.