Supermicro X7SBi - X7 Sbi Quick Reference

Chapter 1: Introduction
1-5
X7SBi Quick Reference
Jumper Description Default Setting
JBT1 CMOS Clear (*See Chapter 2)
JI
2
C1/JI
2
C2 I
2
C (SMB) Bus to PCI slots (Open/Open: Disabled)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPL1/JPL2 Giga-bit LAN 1/2 Enable Open (Enabled)
JPUSB1 BP USB Wake Up (USB 0/1) Pins 1-2 (Enabled)
JPUSB2 FP USB Wake Up(USB 2~7) Pins 1-2 (Enabled)
JWD Watch Dog Pins 1-2 (Reset)
Connector Description
COM1, COM2 COM Port 1 & COM 2 Header
Fans 1-6 System Fan Headers (Fans 1-5), Fan6: CPU Fan
Floppy Floppy Disk Connector
IDE IDE Slot (Blue) (J3)
I-SATA0~I-SATA5 6 Intel SATA Ports (JS1-JS5)
JD1 Speaker Connector (Pins 3-4: Internal Buzzer Enable,
Pins 1-4: External Speaker Cable)
JF1 Front Panel Control Header
JL1 Chassis Intrusion Header
JLED1 Power LED Header
JOH Overheat LED Header
JPW1 ATX 24-Pin Power Connector
JPW2 12V 8-pin Power Connector (Required)
JWOL Wake On LAN Header
JWOR Wake On Ring Header
KB/Mouse PS/2 Keyboard/Mouse Connector (J28)
LAN1/2 Ethernet RJ45 (Gigabit LAN) Port1/Port2 Connectors
Printer Parallel Port (Printer) Header
SIMSO IPMI SIMSO IPMI 2.0 Socket
SMB_PS Power Supply SMbus Header (I
2
C)
SPK1 Internal Buzzer
T-SGPIO 1/2 Serial General Purpose Input/Output Headers 1/2
USB 0/1 Back Panel Universal Serial Bus Ports 0/1 (J11)
(F/P) USB 6/7, 8/9 Front Panel Accessible USB Headers 6/7, 8/9(44, J45)
USB 10, 11 Front Panel (Onboard) USB Ports 10,11 (J47, J48)
VGA VGA Connector (J7)
LED Indicator Description
LE 1 Onboard Standby PWR warning LED Indicator