Chapter 2: Installation
2-25
200
4
ITE
IDE CTRL
Battery
Super I/O
Slot1 PCI 33 MHz
Slot6 SXB2 PCI-X 133 MHz
Slot6 SXB1 PCI-Exp. x8
JBT1
JPG1
ATI
ES1000
VGA
CTRL
JPL1
Intel
LAN
CTRL
Buzzer
Intel
LAN
CTRL
BIOS
KB/MS
USB0/1
COM1
VGA
LAN1
LAN2
Fan6
ATX 24-Pin PWR
CPU Fan
SMB PS
Fan1
8-Pin PWR
CPU
MCH
Intel 3210
Xeon
3000/3200
DIMM1A
DIMM1B
DIMM2A
DIMM2B
Fan 5
JLED1
LE1
JOH
Fan2
Fan3
JL1
JWD
Speaker
IDE
Floppy
Fan4
SATA0
SATA1
SATA2
SATA3
SATA4SATA5
JWOL
JI
2
C1
JI
2
C2
COM2
Printer
SIMSO (IPMI 2.0)
JPL2
Intel ICH9R
PXH-V
USB8/9 USB6/7
FP USB10
FP USB11
FP CTRL
JUSB1
JWOR
JPUSB2
T-SGPIO2
T-SGPIO1
X7SBi
GLAN LEDs
There are two GLAN ports on the mother-
board. Each Gigabit Ethernet LAN port has
two LEDs. The yellow (right) LED indicates
activity while the other LED may be green,
amber or off to indicate the speed of the
connection. See the table at right for the
functions associated with the second LED.
2-8 Onboard Indicators
Activity
(Right)
Link
(Left)
GLAN Link LED (Left)
Speed Indicator
LED Color Defi nition
Off 10Mbps or No Connection
Green 100 Mbps
Amber 1 Gbps
GLAN Yellow LED (Right)
Activity LED Indicator
LED Color Defi nition
Yellow Flashing: Active, running
@10Mbps, 100Mbps or
1 Gbps
A
B
A. GLAN1 Port
B. GLAN2 Port
C. Onboard LED
Rear View
(Viewing from the back of the system)
Onboard Power LED
LE1 is an Onboard Power LED located
on the motherboard. When this LED is
lit, the onboard power is on. Be sure
to turn off the system and unplug the
power cord before removing or installing
components. See the layout below for the
LED location.
C
To Next Page
Loading...
