Chapter 2: Installation
2-7
X7SBi
To Install:
Insert module verti-
cally and press it
down until it snaps
into place. Pay atten-
tion to the notch.
Figure 2-2. Installing DIMM into Slot
To Remove:
Use your thumbs to
gently push each
release tab outward
to release the DIMM
from the slot.
Top View Of DDR2 Slot
DDR2
2-5 Control Panel Connectors/IO Ports
The I/O ports are color coded in conformance with the PC 99 specifi cation. See
Figure 2-3 below for the colors and locations of the various I/O ports.
A. Back Panel Connectors/IO Ports
Back Panel I/O Port Locations and Defi nitions
Back Panel Connectors
1. Keyboard (Purple)
2. PS/2 Mouse (Green)
3. Back Panel USB Port 0
4. Back Panel USB Port 1
5. COM Port 1 (Turquoise)
6. VGA Port (Blue)
7. Gigabit LAN 1
8. Gigabit LAN 2
(*See Section 2-5 for details.)
1
2
3
4
5 6 7
8
To Next Page
Loading...
