SC847 Chassis Manual
4-10
Expansion Slot Setup in U (Universal Output) Chassis
SC847 U model chassis accepts a slightly smaller "L" shaped motherboard to allow
for a universal expansion card. This universal output card allows the systems to
accept SAS, SCSI, IB, Ethernet, and other types of connections.
SC847 U chassis accepts three full-length, full-height add-on cards and the fourth
slot is used for the UI/O card. It includes a bracket that extends from the fan row to
the back of the chassis. This bracket provides support for the riser card.
Installing a Universal Input/Output Card in the SC847 U Model Chassis
Disconnect the power supply, lay the chassis on a at surface, and open the 1.
chassis cover.
Connect the universal input/output to the motherboard using the slots pro-2.
vided on the motherboard and the back panel.
Secure the card to the chassis using the four screws provided in the chassis 3.
packaging.
The SC847 U model chassis includes three full-height/full-length slots and three
low-prole slots.
Installing Expansion Cards in the SC847 U Chassis
Disconnect the power supply, lay the chassis on a at surface, and open the 1.
chassis cover.
If you are using a universal input/output card, make sure it is installed before 2.
continuing.
If you installing low prole add-on cards, remove the chassis air shroud.3.
Secure the card to the chassis using the four screws provided with the chas-4.
sis packaging.
To Next Page
Loading...
Need help?
General
