SC847 Chassis Manual
5-10
Adapters for Round and Threaded Hole Racks
The SC847 chassis includes adapter brackets for those customers using round hole
racks or racks with threaded holes size M5 or larger.
Installing the Adapter Bracket
Place the hooks of the front of the outer rail into the square holes of one of 1.
the adapter brackets.
Place the hooks of the rear of the outer rail into the square holes of a second 2.
adapter bracket.
Adjust the length of the outer rail to t within the rack uprights.3.
Secure the front adapter bracket to the front of the rack using the screws 4.
recommended by the rack manufacturer.
Secure the rear adapter bracket to the rear of the rack in the same manner. 5.
To Next Page
Loading...
Need help?
General
