13
EN
i
6.3 Required expert knowledge of the installer
The electrical connection, installation and commission-
ing of the roller shutter belt winder must only be carried
out by a qualied electrician in accordance with the
instructions in this manual.
7. Safety instructions for the installation
Poor routing of the belt can cause the belt to fail and
leads to unnecessary loads on the roller shutter belt
winder.
◆ Install the belt winder so that the belt runs as straight
as possible into the device, in order to avoid unneces-
sary friction and wear.
Incorrect installation can lead to property damage.
Strong forces are exerted during operation of the
system which require secure installation on a rm base.
i
To Next Page
Loading...