30
EN
16. Removing the superrollo (e.g. in the event of a move)
1. + + Erase all settings.
Simultaneously press and hold
the buttons.
2. Fully close the roller shutters.
3. Continue to press and hold the
down button.
4. In doing so, pull out the belt as far as possible from the
top of the roller shutter belt winder.
5. Remove the cover plate from the lower assembly hole.
6. Subsequently release the fastening screws and remove
the roller shutter belt winder from the wall.
7. Open the winding wheel cover .
i
To Next Page
Loading...