Superrollo GW70 - 10 Feed the Belt through and Screw on the GW70

19
EN



1. Open the winding wheel cover  .
10. Feed the belt through and screw on the GW70
i
CAUTION!
There is a risk of injury from the turning winding
whheel .
Never reach into the winding wheel compartment
when the motor is running.
2. Check the position of the xing hook  and if neces-
sary correct.
The xing hookn  on the winding wheel  must be
easily reached. If not:
2.1 Insert the mains plug into the socket.
2.2 Press the [ Up ] button until the xing hook 
in the winding wheel compartment is easy to
reach.
2.3 Remove the mains plug again from the socket.