18
EN
There is a risk of fatal electric shock when touching
electrical components.
◆ Carry out all installation and connection work in an
isolated and de-energised state.
◆ Disconnect all phases of the mains power supply
cable and secure it to prevent any reconnection.
◆ Check that the system is de-energised.
9. Safety instructions for the electrical connection
i
9.1 Electrical connection
i
1. Plug in
the enclosed cable and screw until secure.
2. Finally, put the electrical cord in the cable channel and
screw the enclosed cover until it is tight.
A damaged connecting cable may cause a short
circuit.
◆ Ensure that the connecting cable is laid safely.
◆ The connecting cable muse not be pinched or
damaged when screwing on the roller shutter belt
winder.
To Next Page
Loading...