Why is my Supersonic SC-1511 remote not working?
If your Supersonic LED TV remote isn't working, make sure the batteries are installed with the correct polarities or replace them with new ones if exhausted. Also, point the remote control at the remote control sensor and operate it again from a distance of no more than 6m, removing any obstacles between the remote control and the sensor.
What to do if my Supersonic LED TV has no sound or distorted sound?
If your Supersonic LED TV has no sound or the sound is distorted, ensure that the equipment is connected properly and that the input setting for the TV and stereo system are correct. Also, adjust the master volume to a suitable level using the VOL+/VOL- button.
General| Resolution | 1366 x 768 |
|---|---|
| Display Type | LED |
| HDMI Ports | 1 |
| USB Ports | 1 |
| Aspect Ratio | 16:9 |
| Built-in DVD Player | Yes |
| Contrast Ratio | 500:1 |
| Response Time | 8 ms |
| Viewing Angle (H) | 90° |
| Screen Size | 15.6 inches |
| Power Source | AC 100-240V |
| Inputs | HDMI, USB, VGA, AV |
General warnings to reduce risk of fire, electric shock, or injury.
Explains the purpose and operation of each button on the remote control.
Steps to power on/off, select input sources, and change channels.
Guides for initial setup wizard, language, and channel scanning.
Detailed settings for picture quality and sound preferences.
To Next Page
