What to do if my Supersonic SC-1912 LED TV remote control is not working?
If your Supersonic LED TV isn't responding to the remote control, make sure the batteries are correctly installed with the right polarities. If the batteries are old, replace them with new ones. Also, ensure you're pointing the remote directly at the sensor and are within 6 meters of the TV, without any obstructions blocking the signal.
Why is there no sound coming from my Supersonic SC-1912?
If your Supersonic LED TV has no sound or distorted sound, ensure that the equipment is connected properly. Also, verify that the input settings for both the TV and stereo system are correct, and adjust the master volume using the VOL+/VOL- button to a suitable level.
How to reduce noise interference on Supersonic SC-1912 LED TV?
If you're getting noise or other interference on your Supersonic LED TV, it might be caused by electronic equipment nearby. Try relocating the TV or moving the interfering equipment away.
General| Screen Size | 19 inches |
|---|---|
| Resolution | 1366 x 768 |
| Display Type | LED |
| Aspect Ratio | 16:9 |
| HDMI Ports | 1 |
| USB Ports | 1 |
| Brightness | 200 cd/m² |
| Contrast Ratio | 1000:1 |
| Audio Output | 2 x 3W |
| VGA Port | 1 |
| Built-in Speakers | Yes |
| Power Consumption | 25W |
General safety precautions and warnings for product use.
Steps for connecting the unit to AC power and external antennas.
Steps for playing discs, stopping, and skipping chapters/tracks.
Configuring general display and OSD settings via the setup wizard.
Tuning channels and adjusting volume in TV mode.
Troubleshooting general power, picture, sound, and DVD issues.
To Next Page
