Supmeter BST106-N59 - Menu Operation; 6.1 Main Menu

22
6. Menu Operation
6.1 Main Menu
Main Menu
Second Menu
Description
F1: SET
[F1 Parameter
Setting]
1 Weighing
Weighing parameters setting.
2 Calibration
Calibration parameters setting.
3 Setpoint
Setpoint parameters setting.
4 Alarm
Alarm parameters setting.
5 Communcation
Communication parameters setting.
6 Display
User interface parameters setting.
7 Time
Time parameter setting.
 Date [Parameter [903] Date Format]
 Time [Hour: Minute: Second]

Week [ Monday ~ Sunday]
F2: CAL
[F2 System
Calibration]
1 Zero Cal. [Unload&Idle]
Zero Calibration.
Lift the lift-arm and bucket of wheel loader with unloading
and idle speed for correcting Zero Value, Run Length Ratio
or IdleAcc.Value (Acceleration Value at Idle Speed).
2 Zero Comp. [Unload&ACC]
Zero Compensation.
Lift the lift-arm and bucket wheel loader with unloading and
accelerating for correcting Zero Compensation Coefficient.
3 Span Cal. [Load&Idle]
Span Calibration.
Lift the lift-arm and bucket wheel loader with loading and
idle speed for correcting Span Coefficient.
4 Span Comp. [Load&ACC]
Span Compensation.
Lift the lift-arm and bucket wheel loader with loading and
accelerating for correcting Span Compensation Coefficient.
F3: REC
[F3 Record
Management]
1 Query Truck Records
Query Truck Loading Records.
2 Query Mixing Records
Query Mixing Records.
3 Query Shift Records
Query Shift Records.
4 Clear Truck Records
Clear Truck Loading Records.
5 Clear Mixing Records
Clear Mixing Records.
6 Clear Shift Records
Clear Shift Records.
7 USB-Copy Truck Records
Copy Loading Records without Single-bucket-loading
-weight to U-disk.
8 USB-Copy Detail Records
Copy Loading Records with Single-bucket-loading-weight
to U-disk.
9 USB-Copy Detail Records
Copy the Shift Records to U-disk.