EasyManuals Logo

SUPREME MULTI User Manual

SUPREME MULTI
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
Symbol
Button
Function
SCROLL
to advance to
the next parameter
to increase the value
of the parameter
to decrease the value
of the parameter
UP
DOWN
POWER-UP
After power-up the display will show the installed
software version for a period of 5 seconds; f.e.:
EZ3P5f EZ3PB r14
POWER FAILURE
In the event of a power failure, the program will remain
®
stored in the NOVRAM during an undefined period, while
the SuperCap will maintain the correct time of day during
a period of several hours; consequently, in case of
prolonged power failure, the time of day might not be
maintained; if this happens, the time of day will be reset to
8:00 when the power supply is re-established, while the
indication will flash, indicating that the time of day needs
to be set.
When the power failure occurs during the execution of an
automatic regeneration, the appliance will immediately
return to the service mode; when the power supply is re-
established, the appliance will resume the regeneration.
ELECTRONIC CONTROL PANEL
BRINE FILL
REGEN PENDING
Rgn:XXX CycY:ZZZ
REGENERATION MODE
In regeneration mode the display shows the actual
regeneration cycle and, where relevant, the total
remaining regeneration time and remaining cycle time:
SERVICE MODE
In service mode the display shows the time of day and the:
8:01 1000L -
Once the maintenance interval is reached, the display will
intermittently show the message:
While the appliance will continue to operate normally,
it is recommended to have preventive maintenance
performed by a professional.
Maintenance Now
MAINTENANCE REMINDER
- Only available if the maintenance reminder function has been
activated and programmed by your supplier!
The appliance can be reset to service mode at any time
by pressing the scroll button, as such manually
advancing it through the regeneration cycles.
TIMER FAILURE
In the event of a timer failure, the display will show the
message:
If powering off/on the appliance doesn't solve this
problem, professional service is required.
Service Required

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SUPREME MULTI and is the answer not in the manual?

SUPREME MULTI Specifications

General IconGeneral
BrandSUPREME
ModelMULTI
CategoryWater Filtration Systems
LanguageEnglish

Related product manuals