Controls, Features and Options
8-3
QuickSurf Pro
Quicksurf Pro is a wakesurf system attached to each side of the transom used for
making and shaping the Surf Wave. The plates, which can be adjusted to different
angles allow for a controlled wave size and shape.
On an equally weight-distributed surf boat, the system can allow for a driver to
shift a surf wave from port to starboard with just a press of a button on the See
Touch Screen. The Quicksurf Pro can be used in combination with the Stinger
Wake Plate to tune the wave, or Quicklaunch to get the boat to plane quickly
without bow rise.
See separate See Touch Owner’s Manual for operation.
Figure 3Quicksurf Pro
Figure 8-3
Stinger Wake Plate
The Stinger Plate is a large center plate located off the transom of the boat. The
plate helps produce lift during the Quicklaunch sequence. The plate also helps
form a more steep or mellow wakeboard/surf wave depending on the location of
the plate in the up or down position.
Supreme_2018.book Page 3 Wednesday, January 31, 2018 9:30 AM
To Next Page
Loading...
