Controls, Features and Options
8-25
See the Trim Tab Operator’s Manual for additional information.
Figure 24Typical Power Trim Tab
Figure 8-24
WAKE TOWER (OPTIONAL)
Wake towers are used to provide a higher towing point for water sports and to
mount lights and other accessory equipment. Towers are solidly constructed from
stainless steel or aluminum and are mounted solid to the boat. Some towers may
have an optional folding feature, which allows the tower to be folded for storage or
clearance. WARNING! Misuse or overloading of the wake tower can cause
death or serious injury. The wake tower is designed for water sports only.
DO NOT use for towing other watercraft, parasailing, kite flying or towing
tubes or other similar towables. Read the safety decal on the wake tower
before using and DO NOT overload the tower’s weight rating.
COCKPIT HEATER SYSTEM (OPTIONAL)
A marine heater uses the heated engine coolant to produce forced air heat
through a ducted location in the boat or through a snorkel-type tube. Heated
engine coolant is circulated through a heater core and an electric blower fan
moves air over the heater core, transferring heat from the heater core to the
ducted area air in the boat or on the windshield. Where applicable, the snorkel
tube can be moved anywhere within its reach to provide an isolated heat duct. A
helm or remote panel-mounted ON/OFF switch operates the heater blower fan.
See the Marine Heater Operator’s Manual for further information.
Supreme_2018.book Page 25 Wednesday, January 31, 2018 9:30 AM
To Next Page
Loading...
