Section 9
9-14
Anchors and Anchoring
Anchor line (rode) is constructed from various materials and is available in many
diameters and types. Consult with your local marine supply store for a
recommendation on appropriate lines for your boat anchor and application. For
most applications, anchor line length should be at least six to seven times longer
than the depth of the water in which you are anchoring. Always have plenty of
additional anchor line on-board. WARNING! ALWAYS anchor from the bow;
NEVER anchor from the stern. A small amount of current will make a boat
unsteady. A strong current can pull a boat anchored by the stern under the
water and keep it there.
Figure 9-7
Helpful guidelines when anchoring:
• Make sure the anchor line is tied to the anchor. Tie the other end of the line to
the forward cleat or bow eye.
• Head your boat into the wind or current over the spot where you want to lower
the anchor.
• Stop your boat before lowering the anchor.
• Slowly lower the anchor until it hits bottom.
Anchors are available for various applications and
come in many sizes, types and shapes. Boat weight
and size are primary factors in choosing an anchor.
When selecting an anchor, consult other qualified
boaters or local marine authorities.
DANFORTH
ANCHOR
KC-0042-A
KC-0260C-A
6 TO 7 TIMES
THE DEPTH
Supreme_2018.book Page 14 Wednesday, January 31, 2018 9:30 AM
To Next Page
Loading...
