Copyright 2011 Cellphone-Mate, Inc. All rights reserved.
17
This chapter describes how to install
the amplifier and antennas for best
results.
4.1 - Selecting the Locations
Select the locations for the exterior antenna, inte-
rior antenna(s), amplifier, cables, and accessories
as described in the previous chapter.
CAUTION: FAILURE TO PROPERLY PLAN
THE AMPLIFIER INSTALLATION CAN
CAUSE SIGNAL OSCILLATION AND/OR
OTHER EQUIPMENT MALFUNCTION.
4.2 - Soft Installation
Perform a “soft” installation of all components to
test signal coverage and oscillation before making
the installation permanent. Avoid making holes or
other permanent fixtures during this initial phase.
Please refer to Chapter 5 of this manual for config-
uration and testing instructions. Proceed with the
final installation once configuration and testing
are complete.
4.3 - Exterior Antenna
Mount the exterior antenna in the location you
selected during the planning process. Be sure to
follow all of the instructions included with the
antenna to ensure a safe installation. Remember:
CHAPTER 4: Installation
To Next Page
Loading...