SureSafeGO 24/7 Monitored
2. Modify the Time zone
Command: TZ+ +00/-00
Note: the time must amounts be in 2 digits and at maximum 23 hours in value. “+” in the “time zone” portion of the text indicates east. The symbol “-“ in the
“time zone” indicates west.
Example: tz+02, the system will add 2 hours based on the UTC time.
tz-02, the system will minus 2 hours based on the UTC time.
※ UTC time has been set as default time.
3. User defined name in SMS content
To personalise the text message alerts to include the alarm user’s name, text the following command to the SureSafeGO.
Command: name1,user name
Example: name1,Emma, the tracker will reply “Add name ok!”
To delete name, send name0
4. Location request
4.1 The SureSafeGO can send you a Google Maps link of the alarms location upon request
Command: loc
The device will reply “GPS Info! Time: xxxxx; Lat: xxxx; Lon: xxxx; Spd: xxxxx, Altitude:xxxx Bt: xxx
maps.google.com/maps?q=loc:22.647379,114.030998
※Click on the link then the location can be shown directly on Google Maps on your mobile phone.
To Next Page
Loading...
