6. Press [Next] to select Navigate.
7. If you selected a waypoint in the middle of the route, Suunto Ambit2 R
prompts you to select the direction of the navigation. Press [Start
Stop] to select Forwards or [Light Lock] to select Backwards.
If you selected the first waypoint as the starting point, Suunto Ambit2 R
navigates the route forward (from the first to the last waypoint). If you
selected the last waypoint as the starting point, Suunto Ambit2 R
navigates the route backwards (from the last to the first waypoint).
8. If you are using the compass for the first time, you need to calibrate it.
For more information, see Section 12.1 Calibrating compass on page
81. After activating the compass, the watch starts searching for a GPS
signal and displays GPS found after acquiring the signal.
9. Start navigating to the first waypoint on the route. The watch informs
you when you are approaching the waypoint and automatically starts
navigating to the next waypoint on the route.
10. Before the last waypoint on the route the watch informs you that you
have arrived at your destination.
74
To Next Page