EasyManua.ls Logo

Suunto VECTOR HR - 1.8 BATTERY REPLACEMENT OF THE SUUNTO TRANSMITTER BELT

Suunto VECTOR HR
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
6. place the new cell into the battery compartment (negative side down, positive side up);
7. ensure that the O-ring is in place to keep the Wristop Computer waterproof and place the battery compartment cover back onto the
backside of the Wristop Computer;
8. insert a coin back into the coin slot; and
9. turn the coin clockwise to the close position marked on the back of the case.




1.8 BATTERY REPLACEMENT OF THE SUUNTO
TRANSMITTER BELT
The transmitter belt operates on a 3-Volt lithium cell, type: CR 2032. The average expected battery life of the transmitter belt is 200
hours of use in ideal operating temperatures. Replace the battery as illustrated here:
Note: Suunto recommends that the battery cover and the O ring are changed simultaneously with the battery to ensure that the


Table of Contents

Other manuals for Suunto VECTOR HR

Related product manuals