Suunto VECTOR HR - 4.4 LOGBOOK SUB MODE

31
4.3 24-HOUR MEMORY SUB MODE
In the Altimeter mode, PRESS the [Select] button twice to enter this sub mode.
In the 24-hour memory mode (Fig. 27):
• Field 1 displays the vertical ascent or descent rate;
• Field 2 displays the current altitude in increments of 5 meters or 10 feet, depending on the unit of measure selected ; and
• Field 3 displays the particular hour and to the left the text “memory”.
• The Outer Circumference displays graphically the altitude in hundreds of meters or feet over a full thousand where one complete
circle is equivalent to 1000.
To view the information compiled in the 24-hr memory:
1. PRESS the [-] button to scroll back down in increments of one hour and view the vertical ascent/descent rate and the altitude for
that particular hour.
2. PRESS the [+] button to scroll back up.

4.4 LOGBOOK SUB MODE
In the Altimeter mode, PRESS the [Select] button three times to enter this sub mode. In the logbook mode, nine summarizing displays
are shown. The displays automatically rotate showing the rst display for 7 seconds then proceeds to show the next displays at 4
second intervals.
In the rst display (Fig. 28):
• Field 1 displays the year;
• Field 2 displays the text “LO” with the current logbook number ashing; and
• Field 3 displays the month and day of the particular logbook number. To the left of the month/day, is the text “Log Book”.
The user can PRESS the [-] to scroll down to view previous logs captured and then PRESS [+] to scroll up to view the most current
logbook.
The second display shows the ascent information for the particular logbook that is being viewed (Fig. 29).