35
In the fourth display (Fig. 43):
• Field 1 displays the text “dSC”;
• Field 2 and 3 show up to a 8 digit accumulative vertical descent since the last reset. Field 2 is activated when the value of the vertical
descent is beyond the 3 digit value displayed in Field 3.
4.5.1 Clearing the Logbook History
To clear the history of the logbook:
1. In any of the logbook history displays, PRESS the [Select] button and hold in for 2 seconds. Located in Field 1 is the text “CLR”; in
Field 2 the text “HIS”; and in Field 3, “nO” will begin to ash (Fig. 44).
2. PRESS the [+] button to toggle between “YES” and “NO”.
3. PRESS the [Mode] button to accept the option “YES”.
The logbook history is erased and a new starting date is set to begin new cumulative measurements.
To Next Page
Loading...
