34
4.4.2 How to Start and Stop a Logbook
In the Altimeter main mode or the difference measurement sub mode, PRESS the [+] button twice within two seconds.
A beep will be heard and the ashing text “ Log Book” will appear in Field 3 to indicate the start of the recording.
The recording can be stopped by pressing the [+] button twice within two seconds. A beep will be heard and the “Log Book” text will be
removed from Field 3 indicating recording has stopped.
4.5 LOGBOOK HISTORY SUB MODE
The Logbook history shows a summation of all logs recorded.
In the Altimeter mode, PRESS the [Select] button four times to enter this sub mode. The logbook history mode features four displays.
In the rst display (Fig. 40):
• Field 1 displays the year when the logbook history has last been cleared;
• Field 2 displays the text “HIS”; and
• Field 3 displays the month and day when the logbook history has last been cleared. To the left of the month/day, displayed is the
text “Log Book”.
PRESS [+] to scroll through the different displays.
In the second display (Fig. 41):
• Field 1 displays the text “HI”;
• Field 2 displays the highest altitude reached since the last clearing date; and
• Field 3 displays the date when it was reached with the text “Log Book” to the left.
In the third display (Fig. 42):
• Field 1 displays the text “ASC”; and
• Field 2 and 3 show up to a 8 digit accumulative vertical ascent since the last reset. Field 2 is activated when the value of the vertical
ascent is beyond the 3 digit value displayed in Field 3.
To Next Page
Loading...
