Suunto WING - Suunto Wing Microphone System; Suunto Wing Bluetooth Connectivity

Adjusting settings when the device is on
•
keep the [–] button pressed for 3 seconds to switch the LED lights on
•
keep the [–] button pressed again for 3 seconds to switch between
dierent light modes
•
keep the multifunction button and the [–] button pressed simultaneously for 3 seconds to
enable Head Movement Control
•
keep the [+] and [–] buttons pressed simultaneously for 3 seconds to enter pairing mode
•
in pairing mode, keep the multifunction button and the [+] button pressed simultaneously
for 3 seconds to enable dual device connection
3.2. Microphone
Your Suunto Wing comes with dual microphone and clear voice call (cVc) noise reduction
technology. These features guarantee good voice quality of your phone calls even in noisy or
windy conditions.
You
find the microphones on the right side of the headphones:
1. dual microphone
CAUTION: Do not wash the microphone holes directly with water or volatile liquids, as
they may
aect the performance of the microphone.
3.3. Bluetooth connectivity
Your Suunto Wing headphones communicate with the compatible devices via Bluetooth. You
can pair the product with any Bluetooth devices capable of playing audio, such as mobile
phones, smart watches, tablets, etc. For information on how to pair the headphones with a
compatible device, see 3.4. Pairing.
You can connect your headphones to two Bluetooth devices at the same time. See 4.5. Dual
device connection.
If you want to disconnect the headphones and the compatible device, you can do so in the
Bluetooth settings of the paired device. You have two options. To keep the headphones on
Suunto Wing
7