GSF1200AK6/SAK6 (’06-MODEL) 71
REAR WHEEL SPEED SENSOR/SENSOR ROTOR
REMOVAL
$
• Support the motorcycle with its center stand.
• Remove the rear wheel speed sensor mounting bolts.
• Remove the rear wheel assembly.
(!GSF1200K6/SK6 2D-11)
#
• Remove the rear wheel speed sensor rotor
1.
$
• Remove the right frame cover. (!GSF1200K6/SK6 2D-11)
• Disconnect the coupler and remove the rear wheel speed
sensor from the clamps.
* The ABS is made up of many precision parts; never
subject it to strong impacts or allow it to become
dirty or dusty.
* Do not hit the sensor rotor when dismounting the
wheel.
* The wheel speed sensor cannot be disassembled.
Make sure that the motorcycle is supported securely.
When replacing the tire, make sure not to damage the
sensor rotor.
SAMPLE
To Next Page
Loading...
