72 GSF1200AK6/SAK6 (’06-MODEL)
INSPECTION
• Inspect the wheel speed sensor for damage.
• Clean the sensor if any metal particle or foreign material stuck
on it.
• Check that no wheel speed sensor rotor teeth are broken and
that no foreign objects are caught in the wheel speed sensor.
INSTALLATION
Installation is in the reverse order of removal. Pay attention to
the following points:
• Install the wheel speed sensor rotor as the letters “50T” face
outside.
• Install the speed sensor
1 with the stopper end
A of the wir-
ing harness guide
2 brought in contact with the caliper
bracket.
• Check the clearance between the rear wheel speed sensor
and sensor rotor using the thickness gauge.
% Wheel speed sensor – sensor rotor clearance:
0.3 – 1.5 mm (0.012 – 0.059 in)
" 09900-20803: Thickness gauge
09900-20806: Thickness gauge
SAMPLE
To Next Page
Loading...
