Suzuki DL1000AL4 - Page 13

12
Connect the lead wires to the clutch lever position
switch.
A: Clutch lever position switch
B: Lead wire
RIGHT
CLAMP
Clamp the right switch wiring harness and front brake
hose union with strap.
A: Strap L:140 mm
B: Front brake hose union
C: Right switch wiring harness
LEFT
Clamp the left switch wiring harness and clutch hose
union with strap.
A: Strap L:140 mm
B: Clutch hose union
C: Left switch wiring harness
NOTE:
Cut off the excess strap as shown in the photo-
graph.
OUTSIDE
NOTE:
Cut off the excess strap as shown in the photo-
graph.
OUTSIDE