19
Tighten the front axle nut to the specified torque while
holding the front axle.
Front axle nut: 100 N·m (10.0 kgf-m)
A: Axle nut
FRONT BRAKE CALIPER
Remove the supporter from the brake pad of the right
front brake caliper.
A: Supporter
B: Brake caliper (Right)
Set the front brake caliper so the brake disc plate is
inserted between two brake pads.
Install the front brake caliper.
A: Pads
B: Disc plate
C: Brake caliper (Right)
D: Caliper mounting bolt
RIGHT LEFT
Tighten the front brake caliper mounting bolts to the
specified torque.
Front brake caliper mounting bolt:
39 N·m (3.9 kgf-m)
A: Brake caliper
B: Caliper mounting bolt
NOTE:
Make sure that both the right and left caliper
mounting bolts are tightened with specified torque.
To Next Page
Loading...
