23
REAR VIEW MIRROR
Remove the lock bolt.
Turn in the lock nut as far as possible.
A: Lock bolt
B: Rear view mirror stay
C: Lock nut
D: Opposite thread
Tighten the lock bolt.
Install the rear view mirror and tighten lock nuts
securely after positioning them properly.
Place the rubber boot.
A: Lock bolt
B: Rear view mirror
C: Lock nut
D: Rubber boot
REMOVING THE PROTECTION SHEET
Remove the protection sheet from the muffler.
A: Muffler
B: Protection sheet
NOTE:
Part D of the rear view mirror stay is opposite
threaded.
NOTE:
Align the mirror in the position so as to secure rear
view.
To Next Page
Loading...
