20
ABS SENSOR
Install the front wheel ABS sensor assembly.
A: Front wheel ABS sensor assembly
B: Hole
C: 6 × 12 mm flange bolt
Install the front wheel ABS sensor lead wire bracket to
the fork leg.
A: Front wheel ABS sensor lead wire bracket
B: Stopper (Groove)
C: 6 × 12 mm flange bolt
Arrange the front wheel ABS sensor lead wire routing.
A: Front wheel ABS sensor lead wire
B: Marking
NOTE:
The front wheel ABS sensor lead wire bracket
come in contact to stopper of fork leg as shown in
the photograph.
NOTE:
• Pass the front wheel ABS sensor lead wire in
front of the front brake hose.
• Clamp the front wheel ABS sensor lead wire to
the marking position.
To Next Page
Loading...
