17
Loosen the axle clamp bolts.
Remove the front axle from the fork legs.
A: Axle clamp bolt
B: Front axle
Mount the front wheel assembly properly.
A: Right fork leg
B: Left fork leg
C: Front wheel spacer (Right)
D: Front axle
E: Axle nut (24 mm flange nut)
Temporarily remove the right front brake caliper.
A: Brake caliper
B: Caliper mounting bolt
C: Pad
D: Supporter
NOTE:
• Put a suitable pad C to prevent the motorcycle
from being damaged.
• Do not remove the supporter inserted between
the brake pads until the brake caliper is installed.
To Next Page
Loading...
