CONTROLS
KEY
This motorcycle comes equipped with
a
main ignition key and a spare one.
Keep the spare key in a safe place.
The key number is stamped on a
plate provided with the keys. This
number is used when making
replacement keys. Please write your
key number in the box provided for
your future reference.
I
j
Key
number:
SWITCH
The ignition switch has four positions:
"OFF" POSITION
All electrical circuits are cut off. The
engine will not start. The key can be
removed.
"ON" POSITION
The ignition circuit is completed and
the engine can now be started. The
headlight and taillight will automati-
cally be turned on when the key is in
this position. The key cannot be
removed from the ignition switch in
this position.
NOTE:
Start the engine promptly after
turning the key to the
"ON
position,
or the battery will lose power due to
consumption by the headlight and tail-
light.
"LOCK" POSITION
To lock the steering, turn the handle-
bar all the way to the left. Push down
and turn the key to the
"LOCK
posi-
tion and remove the key. All electrical
circuits are cut off.
To Next Page
Loading...
