SUSPENSION ADJUSTMENT
The standard settings of both front
and rear suspensions are selected to
meet various riding conditions such
as low to high motorcycle speed and
light to heavy load on the motorcycle.
The suspension settings can be
adjusted for your preference and
fine-
tuning.
FRONT SUSPENSION
Spring Pre-load Adjustment
To change the spring preload, turn the
adjuster clockwise or counterclock-
wise. Turning the adjuster clockwise
will increase the spring preload. Turn-
ing the adjuster counterclockwise will
decrease the spring preload. There
are four grooved lines on the side of
the adjuster
@
for reference. Position
5
provides the minimum spring pre-
load and position
0
provides the maxi-
mum preload. This motorcycle is
delivered from the factory with its
adjuster set on position
3.
29
Position
0
33)
Position
3
$3
Position
5
Unequal suspension adjustment
can cause poor handling and loss
or stability.
To Next Page
