IMPORTANT
BREAK-IN (RUNNING-IN)
INFORMATION FOR YOUR
MOTORCYCLE
The first 1600 km (1 000 miles) are the
most important in the life of your
motorcycle. Proper break-in operation
during this time will help ensure maxi-
mum life and performance from your
new motorcycle. Suzuki parts are
manufactured of high quality materi-
als, and machined parts are finished
to close tolerances. Proper break-in
operation allows the machined sur-
faces to polish each other and mate
smoothly.
Motorcycle reliability and perfor-
mance depend on special care and
restraint exercised during the break-in
period. It is especially important that
you avoid operating the engine in a
manner which could expose the
engine parts to excessive heat.
Please refer to the BREAK-IN (RUN-
NING-IN) section for specific break-in
recommendations.
WARNINGICAUTIONINOTE
Please read this manual and follow its
instructions carefully. To emphasize
special information the words WARN-
ING, CAUTION and NOTE carry spe-
cial meanings and should be carefully
reviewed.
The personal safety of the rider
may be involved. Disregarding
this information could result in
injury to the rider.
CAUTION
These instructions point out spe-
cial service procedures or precau-
tions that must be followed to
avoid damaging the machine.
NOTE: This Drovides s~ecial informa
tion to maki maintenance easier or
important instructions clearer.
To Next Page
Loading...
