6-41
REAR BRAKE PEDAL POSITION
The rear brake pedal position must be
properly adjusted at all times or the
disk brake pads will rub against the
disk causing damage to the pads and
to the disk surface.
50 – 60 mm
(2.0 – 2.4 in)
Check that the rear brake pedal is 50
– 60 mm (2.0 – 2.4 in) below the top
face of the footrest.
NOTE: If the rear brake pedal position
is incorrect, ask your Suzuki dealer to
adjust the brake pedal position
because this adjustment requires
tightening torque control.
WARNING
Replacing only one of the two
brake pads can result in uneven
braking action and can increase
your chance of having an acci-
dent.
Always replace both pads
together.
NOTICE
An incorrectly adjusted brake
pedal may force brake pads to
continuously rub against the disk,
causing damage to the pads and
disk.
Follow the steps in this section to
adjust the brake pedal properly.
To Next Page
Loading...
